heh. i used 20guage 1inch. it is quite big but it draws and pins very easily.
i had to. the test prop and tren were taking a long ass time to draw. with the 20 gauge, you just fucking draw! no resistance what so ever. and just pin that shit!
i use an orange one inch in every site apart from front delts as im too nervous!
First I run my gear under hot water( my water comes out smoking) if you warm it ,it draws and injects easier , ( I use alcohol on the tops of gear and injection site , I then switch the tip to a 25g and inject slowly, my favorite spot my shoulder lateral side, depending what state your from syringes are legal in my state so I get 50 20g and 50 25g @a time cost me about 16usd
I currently use 25g x 1.5", I have and get so much scar tissue from the larger pins, Plus currently I only use gear made with EO, its so thin that the smaller gauge pins work like a charm. Up until recently iv mostly pinned my quads because I can do that alone or if they got to sore I would have my wifey pin my glut, I just cant reach ( I can barely wipe my ass TMO ) with all the scar tissue build up, I have recently started pinning my delts, I can reach pretty easy plus is seams like I get tren cough every 2nd or 3rd time in my quad and have yet to get i my delt.
</p>siegmund said:</p>
<p>20 g to draw 25 g 5/8 for front delta and 25 g 1 in everywhere else</p>
<p>
3ml,bd syringe 23 guage 1.5 needle pin the tail on the donkey
buffbod said:No need to get 1 1/2 deep, unless you guys can share why it needs to be that deep. Thanks guys, you're awesome